>

HD10 Prototype Testing by Hatz Engineers

 

Picture 1: Testing Of Our Prototype HD10 Diesel Compressor By Hatz GB Engineers
Picture 1: Testing Of Our Prototype HD10 Diesel Compressor By Hatz GB EngineersThese pictures show the various engineering tests carried out at Hatz GB by their senior engineer on our prototype. This was carried out at the insistence of Hatz GB before they would consider selling us their engines! Our compressor passed all tests carried out with flying colours, with no suggestions for requirement to modify or change any of our specification components or construction.

Picture 1: Testing Of Our Prototype HD10 Diesel Compressor By Hatz GB Engineers
Picture 2: Recording Readngs From The Various Sensors Installed Around The Diesel Engine.
Picture 3: The First HD10 Built With The Hatz Model 1B40 Engine.
Picture 4: Close-Up Of The HD10 Power Unit.
Picture 5: Another View Of The First HD10.
Picture 6: HD10 Prototype Being Prepared For Testing.
Picture 7: Various Vibration, Load And Temperature Sensors Installed.
Picture 8: Readings For Vibration, Load And Temperature Being Recorded.
Picture 9: Readings For Vibration, Load And Temperature Being Recorded. 
Picture 10: Oil Temperature Sensor.
 

Reading Pneumatic Services, 38 Bennet Road, Reading, Berkshire RG2 0QX, UK | Tel: +44 (0)118 986 4466 | Fax: +44 (0)118 986 4465

Copyright Reading Pneumatic Services 2011 Design by Eyekon | Site map | Login / Logout